PDA

View Full Version : Sonix trigger upgrade?


Sonix_Nub3
12-17-2007, 04:54 PM
Does there happen to be a decent (better than stock) trigger frame for a Sonix that's $30-60 ish MAX? "E-trigger" on ebay is $59.95. Is that frame good, and good for its price? thanks :)

sloazzpilot
01-31-2008, 06:58 AM
not too bad but you might want to get the camd frame and anit-chop bolt it is a little more but it will help in the long run.

newkid
01-31-2008, 01:46 PM
firstcall has camd frames for $40

http://www.firstcallpaintball.com/pages-productinfo/category-118_2868_3216_3218/product-4696/paintball-gun-upgrades-kingman-spyder-frames-kingman-kingman-camd-electro-frame.html?zenid=e5824a3f25e395e9239d6f98bc45fd41

here's a vid of firing modes> http://s206.photobucket.com/albums/bb2/z06vetteboy/?action=view&current=pbvid001.flv

Kenny_McCormic
01-31-2008, 02:55 PM
firstcall has camd frames for $40

http://www.firstcallpaintball.com/pages-productinfo/category-118_2868_3216_3218/product-4696/paintball-gun-upgrades-kingman-spyder-frames-kingman-kingman-camd-electro-frame.html?zenid=e5824a3f25e395e9239d6f98bc45fd41

here's a vid of firing modes> http://s206.photobucket.com/albums/bb2/z06vetteboy/?action=view&current=pbvid001.flv

Are those stuffed frames with the batt and charger?

newkid
01-31-2008, 03:41 PM
yeah, it comes with a battery and charger

Altpunkrock
02-16-2008, 11:13 AM
i ordered the CAMD E frame from firstcall before and it works great. Be ready to mod other parts of your sonix to make it work though

Sonix_Nub3
02-16-2008, 05:07 PM
i know, no longer have a sonix.

TheDarkShadow
02-16-2008, 05:17 PM
what do you have...if you dont mind me asking...

Altpunkrock
02-17-2008, 01:46 PM
that was quick

Sonix_Nub3
02-20-2008, 04:54 PM
sure:

well i got my spyder sonix, and it was jacked up so i took it back and got a refund. just ended up buying 98c act. better for woodsball anywho (doesnt stand out like that matte red did :P).

Altpunkrock
02-26-2008, 04:01 PM
i turned my spyder sonix almost completely black except for the feed neck and the body itself. both of those are still matte red. the rest is mostly matte black with a little gloss black

Darkwulf
03-13-2008, 02:31 PM
If I get the CamD trigger frame what else is there to change out for it to work? Does the standard bolt work with it. Thanks for your help in advance.:D

Also any ideas for a drop forward. I know they have to be a certain bolt pattern to work but the ones I have looked at don't tell me what marker they would fit.

tumtum00
03-14-2008, 06:22 AM
I had a 2005 sonix pro, I upgraded it to a rocking trigger, and the thing i had to do to mine, was use either an acs bolt, or put a new board and eyes on my gun, The stock bolt will chop, chop, chop. I minimized this by getting a fasta 18v led hopper, but still it can slow down occassionally, and you will get a chop. The eyes worked great but i liked the stock board better so i put it back in and got an acs bolt from a pilot, and man this gun really threw some ropes then. and i never had one chop with that bolt. Other things to look at are if using co2, get a very good exp chamber,and a reg, and run anti-siphon, or remote line, cause shooting fast with co2, well they don't mix. The other recommendation is go to compressed air/nitro, that is what i did, and man what a much better shooting spyder. I competed in tourneys with guys with ions, egos, etc. and i could keep up with them. also in the camd frame the trigger gets a little rocky from side to side, simple fix though. get some very small washers and put them on the trigger side and put it back in the frame, and no rock again, works great, I hope this helps you if you have any questions feel free to pm me.