View Full Version : Help!!!!!!!!!

12-10-2007, 05:39 PM
Ok so today i was shooting my gun and came home to clean it . Tried to fire it just with the noid clicking and it shot a few shots then stopped. So i got curious and opened my grips. When i opened the grips i found out that a wire had come off of the trigger switch. Now i bought my VS2 about 3weeks to maybe a month but forgot to send in my warranty. If i send in the warranty will it be denied and i will have to find a way to fix my gun or will they still accept it. I really need some help fast.

12-10-2007, 06:00 PM
I never sent my card in for any of my markers & Kingman has helped me out pretty good. The most you should have to pay woulkd be shipping to them & back.

Can you solder? If so, take the frame apart & resolder it.

12-10-2007, 06:09 PM
I am going to send in the card and hope they take it.

But also wouldn't soldering a part of the gun = kinda in a way of tampering with the gun which could void it.

12-10-2007, 11:18 PM
If you don't want to solder it, call Kingman up. Here's their information:

12-11-2007, 05:33 AM
im getting it soldered back on today.

Tech Steve
12-19-2007, 03:19 PM
kingman will except the warranty card, even if it is late... def better to send it in to have them do it, if not it will void warranty

12-19-2007, 09:17 PM
well then i guess i voided my warrenty. seriously i dont think i want to have to ship out a gun wait for it to get fixed then wait for it to come back. When i can get it fixed in one day. I soldered it back on. The soldering that was done to this gun by kingman or what ever soldered it in my opinion is crappy barely holds the wire on i barely tugged that wire and it came right off.

12-20-2007, 06:55 AM
I highly doubt that it voided your warranty.

12-24-2007, 01:49 PM
Well go to your local paintball shop to see if they can fix it!!!

12-24-2007, 02:24 PM
. seriously i dont think i want to have to ship out a gun wait for it to get fixed then wait for it to come back.

You probably wont have to send you whole gun in.. They just tell you to send that piece. I recently sent a wire in and within a week they sent it back. Very good service=)...

I signed up the warenty online and called the tech department and they said "Alright just send in the broken piece"

And it wont take too long to fix, they just replace the part you need its too much trouble for them if they have t fix themselves

12-25-2007, 12:01 AM
Um why are people still posting in here. I already fixed the gun. Voided warranty or not its fixed.

12-25-2007, 04:37 AM
they're post whores

12-26-2007, 05:40 AM
You never said you fixed it?

Tech Steve
12-26-2007, 01:42 PM
re-soldering anything on the marker definitely voids the warranty...

12-26-2007, 09:02 PM
im getting it soldered back on today.

Yes i did.:D

01-05-2008, 01:27 PM
I had the same problem not a big deal just take it out and solder it. i also called kingman and they sent me a new wire so i have that one for replacement. MY still works till today.

The Pumper
01-05-2008, 02:44 PM
Hes got it. Its been fixed for some time now.