PDA

View Full Version : Ebay sweetness


oldironmudder
11-10-2007, 10:52 AM
http://i117.photobucket.com/albums/o54/drunknmudder77/5aa4_1.jpg

I just won this not to long ago...

Jet black EM1
13" equation barrel (uses steel inserts LIKE freak)comes with one insert .693
ccm clamping feedneck
bob long torpedo main reg with gauge
has after market high flow valve (gun runs at 200psi)
lightened trigger switch

spray and pray
11-10-2007, 10:59 AM
not bad. Mind me asking how much you payed?

oldironmudder
11-10-2007, 12:41 PM
80 clams + shipping under 100 clams total :)

Hossy
11-10-2007, 12:59 PM
http://i117.photobucket.com/albums/o54/drunknmudder77/5aa4_1.jpg

I just won this not to long ago...

Jet black EM1
13" equation barrel (uses steel inserts LIKE freak)comes with one insert .693
ccm clamping feedneck
bob long torpedo main reg with gauge
has after market high flow valve (gun runs at 200psi)
lightened trigger switch


Win Victoriously

oldironmudder
11-10-2007, 01:08 PM
ya the funny thing is some one was trying to out bid me & I ran the price to just over 120 then I got on last night & he/she backed out & it droped to 80

DFSniper
11-10-2007, 01:10 PM
sweet, so you got an em1 for $80?

oldironmudder
11-10-2007, 01:20 PM
EM1, silver bob long torp & that barrel. If freak inserst fit it Ill prolly pick up a few.

Good deal if you ask me cause I also have a bone stock one on the line for 80 or 85.

spray and pray
11-10-2007, 01:47 PM
wow I wish I could find that kind of deal..... Oh wait I can! finally life is fair. My local paintball store is running empires for $99 instead of $159

DFSniper
11-10-2007, 02:02 PM
i need to do more ebay shopping...

th3_0n3
11-10-2007, 03:49 PM
Nice EM1

Oscum Guy
11-11-2007, 08:13 AM
nice! cant wait to see the finished product.

newkid
11-11-2007, 08:35 AM
looks good

oldironmudder
11-11-2007, 08:41 AM
Im tempted to drive the hour or so to the real field just to test it out, or I could throm my Palmer, DZ3 & anti-siphon 20oz on it & have fun. I plan on making it Co2 friendly.

BloodLustAC
11-11-2007, 10:52 AM
Nice find, I got my last one in a trade for a Halo and $15... came with the modded Angel LCD board and frame and everything too ;)

I'm gonna try a trayless mod when the universal T-board comes out, since that's like the only way to consolidate all the electronics into just the frame. What are your plans for this one?

oldironmudder
11-11-2007, 11:05 AM
I havent really thought alot on this one cause my blue emmie will be sick. Thinking about getting Taco to make a trigger & fab up some kind of trigger gaurd. If I get off my but & draw another LPR adapter & could sell enough of them to break even on the cnc setup I would ro a run of them.

With being stuck with Co2 & not wanting to go with HPA I may end up doing a switch over to a mech on this one til I get a micro rock & 2 Palmer Stabs.

Prolly sell the torp or trade for a palmer.


Oh ya, I may try & put my AMG frame on it just cause its so much shorter than my classis timmy frame.

oldironmudder
11-21-2007, 09:55 PM
A little update, It should be here come this Monday, or atleast thats what UPS says on the tracking thing I got 2 days ago & finally checked tonight.

BloodLustAC
11-22-2007, 07:30 AM
Nice. I started trying to mill an EM1 body, I was going to half-back it but leave part of the back for the back cap and spring to hold onto. I think I might've left too little back there though, so I hope the bolt won't just rip off the metal or something...

oldironmudder
11-22-2007, 01:44 PM
How much did you leave? I kinda figured ~1/8" should be enough but ~1/4" would more than work. Then take the rest of the upper tube off up towards the feedneck.

BloodLustAC
11-23-2007, 07:41 PM
It's probably between 1/8 and 1/4, so hopefully I'll be okay. I was only going to go up to the bolt slot, but I could go all the way to the feedneck?? Won't that leave the whole bolt exposed, or does that not even matter in this case since the pin holds it in place?

oldironmudder
11-24-2007, 05:32 AM
The pin doesnt really hold it in place, the bolt holds the pin. You couldnt go all the way to the feedneck because of the valve outlet hole plus the bolt doesnt have orings :( so thats a nother problem.

A window would do better & prolly look better if you ask me. About a .5" window running from about .25" from the rear to about 3/8" behind the valve outlet.

oldironmudder
11-27-2007, 05:31 PM
OK, I got it monday!!!!!!!!! I was tickled pink!!!!

Anyway, first thing I did was strip it down & check the condition of the internals. WOW! Ram was so slick & clean. The bolt, OMG looks like it has less than 5 cases shot through it. Valve.... Ill tell ya that one in a minute. Barrel, very very nice, shame the company went under. Rather light even with the stainless steel insert.

Other than a little dirty from shipping & a little paint on it and the dang pipe dope the PO used for the fittings it was a real good buy.

The valve........ OMG, makes the stock one look like total junk as far as size of the inlet port.. The spring is so soft, yet hard enough to seal. I couldnt find my 3/16 allen so I couldnt take it out to compare side-by-side but still, OMG.

The next thing I did, took off the ugly macro & grip mounted asa and....... and...... and.... put my DZ3 & stainless hose with QDs. Full tank of CO2 & a hopper of paint!!! KABOOM it works!!! At 400psi it would sling paint so fast I couldnt see it til it got right up to the trees. Backed it down to 225psi ish & it would still throw them like rockets!!

The only real problem was the recharge rate, it was so sad. I gotta rebuild it but it worked out pretty good.

Before yall ask, I plan one getting a female Palmer for the DZ3, trading or selling the torp to get a fatty palmer & a micro rock LPR. Prolly a Taco trigger & some kind of circut board.

Ill get pics before next week along with those others. The wife miss placed the camera.

Ace24
11-28-2007, 09:16 PM
i need to do more ebay shopping...
eBay is hit and miss.

oldironmudder
12-02-2007, 04:25 PM
Yall ready for these pics????

In the window
http://i117.photobucket.com/albums/o54/drunknmudder77/EM1window2.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table3.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table1.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table4.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table5.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table7.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1window1.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/EM1table6.jpg

Oscum Guy
12-02-2007, 04:27 PM
damn thats nice

newkid
12-02-2007, 05:20 PM
looks good, If I were you I'd get new clear grips and a new feedneck

oldironmudder
12-02-2007, 05:32 PM
looks good, If I were you I'd get new clear grips and a new feedneck

I havent thought about the feed neck. Ya it sits high but look at how tall the marker is, the feedneck doesnt feel that tall.


I was thinking about making some plexi grips or get some of those nice ones from PBN. I dont care to much for the timer grip on there, to bulky for my. I even took the Dye Stickys off my last EM1 cause they were to bulky.

DFSniper
12-03-2007, 07:27 AM
i'm jealous of how your torp screws in perfectly...but thats because you have a VA adapter and not a standard VA. mine is retarded, if i didnt shim it like hell, the hose would be on the front and the guage port facing me. or does it not matter which holes are used for for the hose and gauge??

very clean looking gun. i would say either add more chrome/nickel, or replace the reg with a black palmers. IMO that would balance out the color scheme a little.

oldironmudder
12-03-2007, 04:03 PM
Ive made my mind up about this much so far: Fatty Palmer, Female Palmer & .690 Palmer brass barrel all nickel plated/chrome. Not sure about the Micro Rock, either black (more than likely) or nickel/chrome.

I wanna get a trigger from Taco unless I do from funky frame swap.

DFSniper
12-03-2007, 04:39 PM
if youre going the nicke/chrome route, get a matching feedneck and some diamond-plate grips, that would look cool!

Sonix_Nub3
12-17-2007, 04:05 PM
you LUCKY lil thing, wish i could get one ;). again nice. i like how u say u "won" it :)

Oscum Guy
12-17-2007, 04:33 PM
ur gonna run that mofo on co2!?!?!

DFSniper
12-17-2007, 05:11 PM
lol, i think hes gonna run dual palmers, so he should be good...

oldironmudder
12-22-2007, 07:35 PM
ur gonna run that mofo on co2!?!?!

Darn skippy!!! Valve will see dual Palmers & anti-siphon. The noid will see that plus a micro rock.

Ive really been thinking about doing a mech mod. Ive seen how other markers work so well on the valves ive looked at plus I could be a little rougher with it being a mech. Plus Im kinda on a "K.I.S.S." kick right now.