View Full Version : Help! Vs3

11-07-2007, 12:21 PM
My fore grip moves left and right... seems like it is loose but is not...help please.

11-08-2007, 10:06 AM
That's normal for the VS2/3

11-08-2007, 05:59 PM
it could actually be the screw that tightens the front block to the lower frame. mine came loose once. you will have to remove the trigger frame being careful especially of the eye wires. You can follow the directions found in the manual (look for the section about replacing the cup seal on page 16).

You will need to retighten SCR008 as listed in the manual for your marker on page 20. I have added some loctite to it to help secure it in place and have never had it come loose again. While you have the front block off go ahead and apply some lube to the two o-rings and then reassemble.

If you have any questions or need further help feel free to PM me.

Good luck!