PDA

View Full Version : Chopping


PRoBoxer18
11-01-2007, 06:37 PM
As embarrising as it sounds my Electra chops alot of paint. And I dont use crappy paint either. I was thinking of buying a Virtue Board with Eyes for about $120.00. Will this really stop the chopping like it says it will? Is there any other things I can buy to prevent chopping.I know that you can buy bolts, but I want top of the line bolts that dont chop.

oldironmudder
11-01-2007, 06:59 PM
If the eyes are installed right they will stop all bolt chops.

I have an anti-chop bolt forsale. Click my yardsale page.

SupaSnipa
11-01-2007, 07:33 PM
Do you have the '05 Electra with ACS? If so you should really get a new board and get it drilled for eyes.

If you have the '06 Electra with Eyes then open the grips, the eye wire might not be in all the way. Another thing that it might be its your eyes are drity and so they basically are covered in paint and therefore the beam is broken all the time. Clean your eyes.


EDIT: If you have '05 with ACS then another thing that could be wrong is that the ACS bolt isnt broken in, oldironmudder has a link in his sig about that