View Full Version : About the Killa Ball Detent
02-09-2006, 01:37 PM
I friend of mine bought the Killa Ball Detend. but i just received one.., did they come in couple? or the store missed one? or they just sold one? and tell your impressions about it.., its good? how you set it up?? i mean its work doing a pressure that can be modified to let the sphere move fast or slow..,
Thanks in advance for the help
02-09-2006, 01:41 PM
yea they only come in singles. u have to buy 2 to get 2. ive heard good things about them
02-09-2006, 01:58 PM
LOL, Oh my god, then my friend have to buy another one...,:p they should say about selling in singles... :mad:
By the way.., it will work for one side while he buy the other? or its restrictive and he needs to wait for the other one?
Thanks for your answer. :)
02-09-2006, 02:03 PM
he might have to wait for the other because if u wait then ur gunna have a big hole where the detent should be. id wait because ur gunna have velocity drops and very inconsistent fps's
02-09-2006, 02:07 PM
No...it just wont be very pretty. Killa ball detents are very good, and I wouldn't buy any other type. He can still use his marker in the mean time; he'll just have to use one of the stock detents. ;)
02-09-2006, 02:22 PM
yea but the air wouldnt be directly directed out the barrel. some of it would escape through the detent hole causing inconsistent and very loud operating. unless he uses his stock one then he should be fine.
02-09-2006, 02:46 PM
I have a kila detent and I love it, with my stock detent I was double feeding with my halo. I did have to take out one of the magnets in the cap.
02-09-2006, 05:10 PM
Are we talking about the Kila Detent that replaces the stock Spyder detent? If so how would you have a big hole? There is afterall only one detent on the Spyder to begin with.
02-09-2006, 05:12 PM
lmao this is the Electra forum. im assuming he is talkign about the ACS so it has 2 detents Nice try tho:D
02-09-2006, 05:24 PM
Ah, I've never looked at the Electra so I never noticed that they added the second detent. Just leave the other stock detent on there until you can get another one, problem solved.
02-09-2006, 09:03 PM
Thanks my friends for all the answer.., i will install the new, and wait for the other, :)
03-23-2006, 03:03 PM
Can someone knows how to set up the kila? i mean, i know you can take out the magnet and stuff , or just turn the screw, so how is the thing? :confused: :confused: :confused: :confused: i can`t figure out...
03-23-2006, 04:19 PM
... no directions ??
just unscrew your old detent, and screw in the new one .. easy as that
03-23-2006, 06:12 PM
LOL, sure that part i figured out :p the other part, the kila has a screw with a magnet (each one) so i am not sure about how its work?.. :(
03-23-2006, 08:51 PM
those are for adjusting the tension that allows/restrict the paintball from entering the breech. You will have to adjust it according to the loader you use and the way in which the marker operates for you. We really can't help you outside this advice ^^^. You just have to get 2 bottles of air/co2 and make the adjustments yourself. If you adjust the screw that the detent gives more force into the chamber, the harder it is for the paintball to enter the breech. This particular setting is good for force-fed hoppers like ripdrives.....
03-24-2006, 12:04 PM
sorry for asking again but? i have a Halo without the rip drive (are you referring to that? i mean it will work the same? )
Thanks for all the answers,,,
04-03-2006, 12:22 AM
you could probably get away with duct or electrical tape over the second detent to prevent air loss if you really want to try it!
04-03-2006, 07:09 PM
just put a stock on left and a kila on right or something ... and that should work