PDA

View Full Version : Converting to electro?


namestealer
10-28-2007, 11:04 AM
Spyder sells some ectronic triggers for it's guns will they be compatable with a MR1?

I am also interested in getting a cheep regulator or expansion chamber(less than 40 dollars). If I buy one will it work with the gun right away or do I have to buy somthing else?

oldironmudder
10-28-2007, 11:53 AM
MR1s will accept any Spyder E-frames. From the first ESP to the new '07s.

Im not 100% sure on the reg setup for MR1s but someone else will pop in here.

namestealer
11-06-2007, 01:17 PM
thanks for the help

Lonus
11-07-2007, 03:08 AM
Look at a female palmers stabilizer with bottemline mount. However it is not cheep. There are some cheep bottemline regulators for spyders on ebay, but I am not sure of the quality.

chnk
11-07-2007, 06:42 AM
if you want more consistency you could run a bottomline regulator setup.

like a on/off asa + palmers inline regulator

or use a female palmers as your bottomline

or if you run remotes,

screw a palmers reg or bob long torp reg into the asa and attach a remote to it

OR find a vs reg, i've seen plenty for like $20

alam3503
11-07-2007, 09:52 PM
if you are looking to get an expansion chamber for your MR-1 most of them need a vertical adapter to work...these can be found online for $5-10....if you settled for a cheap 2-stage chamber you could only spend around $50 (total)

oldironmudder
11-08-2007, 04:17 PM
X-chambers arent worth the money, period. They dont block liquid Co2 like a Palmer regulator.

namestealer
11-10-2007, 05:09 PM
ok thanks for all the help I am going to look at all those ideas and see what would help the best