PDA

View Full Version : electra uncocking problem


Brian
10-28-2007, 08:44 AM
so i went paintballing yesterday and everything was fine with my 05 electra but every now and then i would shoot sorta fast and the bolt wouldnt re-cock.. its not a major problem cause it only happens every once in a while but do yall know what causes this?

thanks,
Brian

Kenny_McCormic
10-28-2007, 08:47 AM
If its the acs model then you need to break in the bolt.

Brian
10-28-2007, 08:49 AM
well how do i do that? cause ive had my gun for almost a year and ive used it many times before..

The Pumper
10-28-2007, 08:50 AM
could be not enough pressure to recock.

Brian
10-28-2007, 08:52 AM
the pressure on the tank never went below 2000 psi cause i kept refilling it after every 2 or 3 games

oldironmudder
10-28-2007, 08:56 AM
Is it lubed & cleaned good?

Have you checked the condition of the striker oring? Cause it will make a differance.

To break in the bolt, click the break in guide in my sig.

Brian
10-28-2007, 10:22 AM
how many times should you compress and release the bolt?

oldironmudder
10-28-2007, 10:41 AM
Alot, say you used a dresser for a few hours. Put it back in your marker & test it. If you some how get a chop or it stops on the ball & doesnt recock keep compressing the spring.


It took a good day in the dresser plus a couple cases to break in my JAM bolt but then again it could have a stiffer spring in it than Kingman's ACS.

Brian
10-28-2007, 10:51 AM
ok thanks