View Full Version : A Mix of New Stuff from Empire, Invert, Viewloader, XO, WGP, Smart Parts, and more!

10-23-2007, 03:21 PM
So, instead of making a billion threads, I will condense it into one.

First up:


Their 08 gear, far more attractive (if I may say so myself) than the RL gear they recently put out.

10-23-2007, 03:22 PM
Cont Empire Gear!

10-23-2007, 03:23 PM
10 pic max sucks, doesnt it?

10-23-2007, 03:24 PM
Second.. INVERT!

You asked for Padding! The Invert SE jersey covers paintball specific zones with a light layer of cushion. Paintball should be fun not painfull
Bottle Gripz tm Silicone Invert logos on the shoulders and arms. These help you keep your tank steady against your shoulder in today’s high action games
Silicone Screened Invert Logo on the tail of the jersey that help grip your harness and keep it in place
High output mesh venting on the chest and under arms. Being hot and uncomfortable is nobodies’ idea of fun. We vent the hot zones for you, you just worry about winning
Micro-ribbed cuffs to easily slip over your ventz elbow pads and gloves
Custom Digi Camo sublimated patterns

Kevlar Gel palm pads where you need it most. Shock protection on the heel of your hand.
Breathable Airprene construction for maximum protection and comfort
Medical Velcro closure with gusset- keeping the gloves on and the dirt out
Clarino Palm- not only is this one of the best feeling thin palm materials but it wont turn your hands the same color as your gloves
Micro fiber sublimated thumb panels so you can buff up or remove any unwanted splatter from your lenses without scratching them
Lycra hinged fingers and thumb- again we know how important it is for you to become one with your marker. We took every consideration in flex especially in the thumb to make sure you don’t even realize you have gloves on

Lightest weight pants we make….some may call them fast pants
Wide hole belt loops! You asked for them we delivered!
Custom Invert zipper pulls
1680 Durra knee construction padded and pre-curved with dual density foam protection
We not only started the 4 way stretch panels above the knees but we have perfected it. These panels give so your pants don’t have to
CB pad and waistband padding. You (and your girlfriend) will thank us later.
Cinch cord cuffs because we know not everybody is the same height
Available in Sizes: YS, YM, YL, XS, S, M, L, XL, and XXL

Gun Bag in Urban Camo

Rolling Gear Bag in Urban Camo

Backpack in Urban Camo

3+2 Pack in Urban Camo

5+4 Pack in Army Digi

All information and photos courtesy of XTREMEZ.com.

Borrowed from TerryStolmeier from PbNation.com

10-23-2007, 03:25 PM
Army Digi:


*Red jersey pics N/A


10 picture max FTL.

3 second rule FTL.

10-23-2007, 03:28 PM
ive never really been a fan of camo patterns, and there seem to be alot of them this year.

10-23-2007, 03:28 PM
Dynasty VLocity?!
Upgrade kit includes new paddle, spring and chip.

Additional view of paddle assembled on the stock base and cap.



30% better battery life than stock VLocity Select Force (SF) with adjustable Force run times of 5, 10, and 20 seconds.

5 point "Ninja star" paddle for more consistent speed.

Adjustable instant anti jam settings for brittle paint or reball use.

"Eject button" feature for in game paddle reversal.

Includes Speed Feed(tm) on complete loader only.

The Torque from Company __________
Rumor is this doesn't actually have a board. I find the design terrible, with the batteries in the very center of the hopper, inaccessible without taking the shells apart.
Here's the 1st pics of a new loader from a new company.


10-23-2007, 03:31 PM

Really, who can say no to Alex.

So enjoy...

For Immediate Release:

Team Dynasty and Great American Paintballs are proud to announce that Dynasty’s signature line of paint is now available to you directly from the factory. Shoot the very best paint out there, battle proven by five time world champions Team Dynasty.

“ We have spent years perfecting this paint, and as a seasoned pro I assure you that you will notice a difference in your game when you use GAP. It will break all over your opponents and not in your gun, and the thick and brilliant fill will always catch a reffs eye. Try a case and improve your game.”

Alex Fraige

Check out: www.DynastyPaintball.com or www.GapPaint.com

10-23-2007, 03:32 PM
XO Industries!
Pants and jersies!
Canada's Best
XO Industries is proud to announce the full release of their hot new line of Tournament level apparel. Featured are the XO line as well as the Designer line.

Exclusively at
H&H Paintball
Petra Extreme Sports


For you Mag Lovers!
G-Force Paintball!

The pneumatic frames can now be ordered! Price US$199.00



Both videos have the 0.2mm trigger pull on the pre-production frames which the prototype had 0.5mm instead.
Firing was done with a milkshake straw.

The following pictures show a pre-production frame only. The production versions will have further improved milling and enhancements.

The production frames include the following:-

- Choice of black or clear anodized finish frames
- Trigger comes with dual ball bearings
- Bottom of frame prepped to accept an optional internal G-Force Micro-LPR
- Channel prepped on top of the frame for LPR hose for external LPR users
- Optional ASA adaptors to allow direct air supply from ASA to internal LPR
- Rubber side grip panels
- Trigger fully tunable
- Trigger pull adjustable down to 0.5mm
- New geometry is fully walkable (does not accept AGD triggers)

Since the Automag is no longer mainstream, we will not be producing these frames as stock items. Each run will be limited and will take 4 to 6 weeks for delivery.

The first production run can now be ordered on our web store. All shipments will be sent by trackable method to ensure no losses.

The second production run is scheduled for Jan-Feb 2008 timeframe which will take about 4 - 6 weeks to complete for delivery.


G-Force Technologies

10-23-2007, 03:35 PM
already an SP thread

10-23-2007, 03:40 PM
A little old, and some new, but these are their new markers, to be released by November of 2007?!


More info on the MG7:

WGP will release this gun called MG7 in next two weeks and the price is lower than Ion.

The Jeff Orr Series II!

10-23-2007, 03:42 PM
zomg new mag?!?!?! and the cocker looks sweet too.

10-23-2007, 03:50 PM
Bob Long
New Marquee Body!
The Edge?!

Just a new body, a total run of 50, these are 2 of 20 that will be available at WC.


Oscum Guy
10-23-2007, 05:07 PM
hot marq body. wgp stuff looks meh tho.

10-23-2007, 06:21 PM
you forgot the sp collapse pod

10-23-2007, 07:08 PM
1. the Torque has no battery door. The battery(s) are installed internally and it's very fast and simple to do. You can install the battery on the torque faster than you can take the screws out of the battery door of the other loaders.
2. The Torque has a unique shaped lid.
3. The Torque has no screws to remove for disassembly and cleaning.
4. All the gears in the gear drive system are built into the motor assembly.
5. The Torque has a completely different/unique 3D shape than the "others".
6. The Torque is significantly lighter than the Halo B and Pulse...
Empty weight: 1.01 lbs.
w/ 1- 9 volt: 1.08 lbs.
w/2- 9 volts: 1.16 lbs.

no screws?
I'm now officially aroused

10-23-2007, 07:58 PM
1. the Torque has no battery door. The battery(s) are installed internally and it's very fast and simple to do. You can install the battery on the torque faster than you can take the screws out of the battery door of the other loaders.
2. The Torque has a unique shaped lid.
3. The Torque has no screws to remove for disassembly and cleaning.
4. All the gears in the gear drive system are built into the motor assembly.
5. The Torque has a completely different/unique 3D shape than the "others".
6. The Torque is significantly lighter than the Halo B and Pulse...
Empty weight: 1.01 lbs.
w/ 1- 9 volt: 1.08 lbs.
w/2- 9 volts: 1.16 lbs.

no screws?
I'm now officially aroused

Eh, if they think a "unique shaped lid" is something to brag about.. Then I question the authenticity of this thing..

Sure, it has no screws.. And it's super easy to take apart and fast, but then that might just mean it is also super easy to fall apart in a game from a bad dive.

Alongside that, I'm not a huge fan of it's looks, it' doesn't look like there was much thought put into it. Except maybe it's supposed to "deflect" paint like the Ricochets were supposed to, but the entire bottom of the front half is empty space other than the batteries.

And then there is the thing about how the shells can be taken apart easily, to gain access to the battery. This also means that you have to empty it out in order to get to the battery. Right now, the Magna seems to have better options than this... As it also has a battery door that requires no screws.

"All the gears in the gear drive system are built into the Motor assembly" - So it's a servo...? Unless they've redesigned the motor all together, the gear box is always going to be external to the motor. How large the gear box is a different story. The VLocity has a small gear box that fits around the motor, and the Eggs and Revolutions all had Servos with the motor inside the box with the gear box on the top half. If anything it's not that great of an advantage. The Belt drive is something that they should incorporate, not the gear drive, as gears have a tendency to strip, while the belt drive simply can't strip (although it still has gears, since the belt is more likely to slip than the gears, the gears simply don't strip and the belt just slips). Gear boxes all have problems with stripping, I have experienced this with motors as slow as those in a 9v Revolution, and as fast as a VLocity, and they all have an inherent problem of stripping. Unless this company decided to go with big aluminium gears, I don't imagine it would be any better. IMO the Belt in a Halo B/Reloader/Pulse is essentially a failsafe.

10-27-2007, 01:37 PM
the MG7's reg is the same one on the wrath. totally sh!t !!


how retarded.

10-27-2007, 04:06 PM
have any more info on the mag frame? i'm definitely stoked about something new for the mag, but i wanna how it works. lol i know it makes it a pneumag, but what about routing hoses and stuff? that's what i'm confused about, cuz i don't see any. it says optional internal lpr, but what about external? will i have to use that ridiculous ASA?

i guess i should probably watch the videos...