View Full Version : problem with electra virtue board

10-23-2007, 01:11 PM
my 06 has a virtue board and i shot it and oiled it yesterday
now when i go to shoot
the led flashes like it is registering a shot
the solenoid doesnt click
upgrading **** guns is a bad idea
next time ill get an etek

10-23-2007, 03:22 PM
Did you put in the new lazer eyes, or the eyes that come with the new board? Because I odn't think it will will work with the stock eyes.

10-23-2007, 03:57 PM
Are the eyes on with no ball in the chamber?

10-23-2007, 04:42 PM
Are all your wires connected properly? If the board flashes like its shooting when you pull the trigger but the noid doesn't click, sounds like there is a problem between the board and solenoid.

Check all wires to make sure they are connected and free of any damage.

Replace or Recharge your battery. If you are using a regular 9v you might want to try a 9.6v rechargeable battery.

Check to see if the noid is operational. This will require connecting it directly to a battery.

If all this fails, your capacitor might be fried, contact Virtue for further help.

10-27-2007, 08:58 PM
yea i figured it out like 5 sec after i posted this
it was just simply
the solenoid got suctioned to the frame from oil
common problem...