PDA

View Full Version : Anti chop bolts


spray and pray
10-16-2007, 12:23 PM
How exactly do the kingman anti chop bolts work? Are they any good? And what one would I need for the spyder Xtra 07?
Sorry for all the questions.

oldironmudder
10-16-2007, 01:18 PM
The bolt is basicly 2 main parts & a spring. The first part is what connects to the striker & the second is an outer sheel the touchs the body & pushs the ball. When the ball is not in the chamber all the way, the outer piece will stop on the ball but the inner piece will keep cycling to recock the marker.

The universal one or even the one I have forsale. ;)

spray and pray
10-16-2007, 02:27 PM
I have this gun. Are you sure the universal one will work?
http://www.pbreview.com/products/reviews/5233/

oldironmudder
10-16-2007, 02:49 PM
This bolt (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=-gMX_IX3p2sW3sLiy1bXVI9RxZUD9Fy9sks=?ProductID=rcTA qArbkNEAAAD%2eBf_JYXNb) will work without problems.


I am unsure about this bolt (http://www.actionvillage.com/is-bin/INTERSHOP.enfinity/eCS/Store/en/-/USD/DisplayProductInformation-Start;sid=-gMX_IX3p2sW3sLiy1bXVI9RxZUD9Fy9sks=?ProductID=utvA qArbmykAAAEI6DN97KFX) cause I dont know how the top slot is cut on your marker.




The bolt I have will be just like the first one, drop right in.

spray and pray
10-16-2007, 03:03 PM
you have to pull the cockin rod up on the stock bolt to slide it in and out. when the cocking rod is pulled up you can slide the bolt in and then when it's in place you push it down to lock into the striker. The gun does not work with this bolt http://www.shocktechusa.com/pages/marker_parts/spyder/mp_spy_sfbolt_long.htm
it doesn't work with that because the little metal stub at the bottom hits the body of the gun when you slide it in.


it is a top cocking gun.



please give me bolts that will actually fit.... it is the spyder classic one. Both of those you reccomended will not fit.

Kenny_McCormic
10-27-2007, 11:34 AM
http://store.centerflagproducts.com/index.cfm?fuseaction=catalog.prodInfo&productID=222&categoryID=7
Timmy bolt should fit.

spray and pray
10-28-2007, 01:29 PM
I don't think it will...

oldironmudder
10-28-2007, 03:28 PM
If your stock pull pin is behind the bolt/striker pin a Timmy bolt will not fit because the slot is to far back on the body.