PDA

View Full Version : Victor Trigger Spring?


2fs2ns
09-25-2007, 06:27 AM
The bolt on my Victor stopped staying cocked back and would just got into "autofire" mode if I put a tank on the gun.
Took the trigger frame off and noticed that a spring is broken in the trigger frame.

The rocking piece that sticks up out of the trigger frame and catches the striker between shots has a spring attached to it that keeps tension on it so it catches the stricker. That spring broke. I haven't been able to find a replacement, and ideas?

http://www.thehoffmanns.com/pics/spyder/spring%20(4).jpg

Other Pics:
http://www.thehoffmanns.com/pics/spyder/spring.jpg
http://www.thehoffmanns.com/pics/spyder/spring%20(2).jpg
http://www.thehoffmanns.com/pics/spyder/spring%20(3).jpg

Thanks!

aodsnyper
09-25-2007, 09:24 AM
i've unwrapped the first couple coils before and straightened them out and then attached it to the sear. that should work just fine.

justin

2fs2ns
09-25-2007, 09:42 AM
Cool, so that part is called the Sear? Newbie alert...

Does it go straight from the pin to the sear, or does it wrap down around the pin below where it connects to the sear?

oldironmudder
09-25-2007, 09:44 AM
The spring goes into the hole in the tab on the bottom of the sear.

Kenny_McCormic
09-25-2007, 04:42 PM
Maddman spring kits include a sear and trigger spring.