PDA

View Full Version : My EM1 project


oldironmudder
09-18-2007, 05:28 PM
Ive got some stock parts heading my way for it but have the crazy idea to put a classic timmy frame on it. what do yall think??

http://i117.photobucket.com/albums/o54/drunknmudder77/004-1.jpg

http://i117.photobucket.com/albums/o54/drunknmudder77/003-1.jpg

SupaSnipa
09-18-2007, 06:01 PM
i think it will turn out SWEET!

oldironmudder
09-18-2007, 06:05 PM
If I do it Im thinking about a plate the bolts to the body & has hole for the frame to mount to.

Then theres always a mechanical EM1

Oscum Guy
09-18-2007, 06:22 PM
thatd be sik dude, def do it.

The Pumper
09-18-2007, 06:32 PM
Nice Classic frame. Gotta see the results to this.

Going to look awesome.

oldironmudder
09-18-2007, 06:58 PM
just got done playing with it & a dead camara. Anyway, if I take a 90* fitting put it in the body inlet then a male to male fitting & slide the frame over that. The hole in the front of the frame will line up with the male/male fitting & I can put a brass T & my asa. It puts the frame flush with the front of the body. Rather nice & good balance even with the heavy body.

But doing it this way, no more stock noid. Unless I do a manifold for the body w/ nipples & one for the noid.

Then I could always cut the frame up, either end of where the frame screw go, so it sits within the body.

Guess no one like the mechanical EM1 idea. :(

Nenkitsune
09-18-2007, 10:29 PM
haha I still like the mech idea. do it like you would with the mech ion and such. maybe mill the sides of the body to thin it out so it sits more flush with the frame?