PDA

View Full Version : can't get scuba fill to work


osofastferu
09-12-2007, 11:32 PM
I bought a used scuba tank and a scuba fill station adapter off ebay, one of these to be exact http://cgi.ebay.com/SCUBA-FILL-STATION-PAINTBALL-SCUBA-TANK-AIR-FILL-STAT_W0QQitemZ110155033189QQihZ001QQcategoryZ10554 QQrdZ1QQssPageNameZWD1VQQcmdZViewItem, anyways it seems that it doesn't line up and leaks air from the bottom of the adapter. anyone know who to fix this?

Kenny_McCormic
09-13-2007, 06:09 PM
make sure the blead valve is shut and the tank oring is good.

timbertiger20
09-13-2007, 06:20 PM
Some scubas are different. Mine requires a different shape adapter to prevent leakage.

osofastferu
09-14-2007, 10:45 AM
it seems the knob on this particular tank wouldn't allow enough clearance for the fill adapter to be put on just perfect, it was millimeteres off and thus caused air leakage everytime. went back to the shop and they replaced valve with one that had a smaller knob on it, now the adapter fits perfect. thanks for the replies guys