View Full Version : Drill a hole in the FeednecK?

08-30-2007, 01:01 PM
is it true...that to help the blowback issue and chopping balls-to drill two small holes in the feedneck?

08-30-2007, 01:45 PM
thats an interesting question
worth trying since feednecks are not that expensive

08-30-2007, 01:53 PM
true...and have you heard abot shortening the feedneck too?

08-30-2007, 02:27 PM
it would help blow back, but nothing really significant, you would have to drill like 4

08-30-2007, 03:18 PM
I would say just get a new clamping feedneck. www.sundragonpps.com sells an adapter and a CCM clamping feedneck just for the MR series. It is a little pricey but it's worth it.

08-30-2007, 04:43 PM
get a new bolt, the acs bolt has no orings and causes more blowback,

The Booth Man
08-31-2007, 05:55 AM
Before you spend the money on a new feedneck, you should really consider getting a good forcefed hopper. I've had my Viewloader Vlocity Hopper on my MR2 for about a year now. I've shot roughly 15000 rounds through it, and I haven't had a single chop. It takes 2 9v batteries, but on the lowest setting, my batteries have lasted for at least 4 days of paintball (4 hours a day)

08-31-2007, 06:01 AM
Ive drilled holes in my elbow to help with blow back but never really noticed anything.

Like the fella said above me, get a force feed hopper.

08-31-2007, 06:33 AM
thankx- I already ordered the ACP from Alamo City
Delrin-LOW BLOW- bolt i hope that helps and if it doesnt...then i'll take a look for a new hopper or something....it just sucks cuz this monday was the first time that i'd use my MR2 in a open field-there's 24 of us coming...i just don't want the gun to get all ****ed in the middle or start of the game