PDA

View Full Version : Got my VS2 back from kingman


Elfmaze
08-26-2007, 07:06 AM
Besides them charging me $12 for a new gauge the marker works great! ran thru 50 rounds without an issue. Besides trying to chop one because i had the eyes off. But an interesting note. they gave me a 600 psi guage with a "red" line at 300. so this one shouldn't blow out! :)

Critical
08-26-2007, 08:52 AM
Good news! Does the gauge still have the black casing like the 300psi one?

VS2 King
08-26-2007, 08:58 AM
Actually It Really Doesnt Matter How High It Goes Because The VS2 Is Made For Low Pressure And If You Put The Psi Over 300 Then You Might Mess Up The Internals.

You Might Not Blow Your Gauge But You Might Blow Your Internals.

Elfmaze
08-26-2007, 03:05 PM
Yup black gauge, Looks sharp! the gun will not get damaged if you overpressurize it from what i have experienced, it just lockes the valve open untill the pressure drops. this way at least you don't break the gauge in the process

Chris Cole
08-27-2007, 01:46 PM
Actually It Really Doesnt Matter How High It Goes Because The VS2 Is Made For Low Pressure And If You Put The Psi Over 300 Then You Might Mess Up The Internals.

You Might Not Blow Your Gauge But You Might Blow Your Internals.

What's it going to do, break the bolt? :confused:

Not like the solenoid has air running through it. You'll be shooting freakishly hot, and the reg may not like it, but the internals will be just fine.

Drefish99
08-27-2007, 02:20 PM
K ladies. Take it to PM's or off the forums. No need to jack up this thread. Thanks.