PDA

View Full Version : help, I'm chopping paint


FullMetal
02-04-2006, 04:34 PM
My marker insist on chopping paint, I've tried everything, I'm shooting PMI Premiums I have a ACS Bolt and I broke it in. It all started when I got my Halo B, my marker was double feeding so I got a new detent, the one made by Kila the magnetic one, well I stop double feeding but it still broke paint. I took my barrel off to clean up a break and noticed that the ball wasn't falling all the way down it looked like my new detent was to strong and not letting the balls drop all the way down so I took out one of the magnets, well that seem to help a little but its still eating paint, sometimes my marker will double fire or shoot 3 balls real fast so maybe it might be my T-board but I changed the dwell and the debounce and no luck. anyone have any suggestions, I would like to get eyes but theres no one around here that could install them and I'm not confident enough myself to do it. And since I have an ACS bolt shouldn't that be stopping it from eating paint, I'm only shooting bps so I know my hopper can feed that. Please someone help me.

ad0131065
02-04-2006, 04:51 PM
I think its the halo. It sounds like the halo is putting so much pressure on the stack that when it feeds one ball, it pushes part of the ball behind it into the chamber, and then when the marker is fired it chops the bottom of the paintball thats halfway in the chamber off. Or your paint is really brittleand is being crushed by the halo.

FullMetal
02-04-2006, 08:54 PM
so what do I do?

durrell
02-04-2006, 09:11 PM
There's several possiblities, but his sounds likely. Are the eyes on the T-Board installed?

timbertiger20
02-04-2006, 09:31 PM
Ummm.....have you tried another hopper.....that will tell you

FullMetal
02-05-2006, 08:07 AM
no I do not have eyes