PDA

View Full Version : My Ego Bolt Project, AKA The Kore bolt.


Paradox313
08-08-2007, 01:08 PM
Well I wanted to do a bolt project to make stock ego bolts into cure bolts, and a killa bolt combined.

What the cure bolt does, is it's a shorter bolt, and never chops.
The Killa bolt has a custom bolt pin(lighter), and huge slots for the detents so you don't wear them as much.
I don't own a Killa bolt, but that is what I read on them

My bolt has the same features as both, minus the lighter bolt pin (I plan to make one soon), and a much shorter than the cure.

Each bolt I made took about 3 hours each using:
A knife
Sand Paper

My dad does have a bansaw, but I felt like using my hands.

'05 Bolt on top (Killa Features, and never chops. Tested with ramping, not one chop).
Cure in the middle
Etek on the bottom(Killa and Cure features. Not tested, but will soon.)

http://img339.imageshack.us/img339/499/allhm1.jpg

'05 forward
http://img267.imageshack.us/img267/2741/05forwardwn2.jpg

'05 Back
http://img113.imageshack.us/img113/6812/05backqc7.jpg

Cure Back
http://img360.imageshack.us/img360/9509/curebacknc0.jpg

Etek bolt all the way back. There is a little bit showing, will get rid of soon.
http://img181.imageshack.us/img181/3241/etekbackwa5.jpg

Well that's pretty much what I did.

I'm going to further modify the '05 bolt to make the spring in the front, rather than the back. Shouldn't take long, all I have to do is drill a little bit.

Also I give all the credit to Planet Eclipse, and Killa Products for making the bolts.

HelpDeskHustler
08-08-2007, 01:33 PM
kila + cure = kore? where'd the 'o' come frome

Paradox313
08-08-2007, 01:38 PM
Well Kure looked like someone just misspelled "Cure", and "Kore" just sounds awesome:D .