PDA

View Full Version : Parts Gun: MR99?


Critical
07-24-2007, 01:37 PM
I had a bunch of parts laying around, so, I decided to put them together and see what happened, here's the result:

http://i5.photobucket.com/albums/y189/jeffstory/Paintball/MR99-1.jpg

And, as you can see, It's top cocking and everything:

http://i5.photobucket.com/albums/y189/jeffstory/Paintball/MR99-2.jpg

All it needs is:
vertical adapter
gas-thru grip/reg
LPC
air line

Feel free to donate any of those parts. :D

SupaSnipa
07-24-2007, 02:29 PM
looks pretty sweet

Critical
07-24-2007, 04:44 PM
It's actually nice. It's incredibly light and snaps right up to the shoulder. With the stock it weighs in at 2lb 12oz, which, for a spyder is pretty good. Once I get the missing pieces, I'm hoping it'll still be under 4lbs, unless I put the e-frame that I'm getting on, then it'll go up to probably 5 or so, still not bad.

I need to dremel a little more forward of the pin, It just barely hits the body when fired, of course, there's about 1/4 inch behind the pin that I didn't need to take out, but, oh well, can't put metal back on.

newkid
07-24-2007, 05:06 PM
looks kinda cool

SparkyGT
07-28-2007, 01:53 PM
its fun building stuff out of spare parts :D

Kenny_McCormic
07-29-2007, 10:21 AM
looks better than a mr1, i like it.

DFSniper
09-13-2007, 08:03 PM
It just barely hits the body when fired, of course, there's about 1/4 inch behind the pin that I didn't need to take out, but, oh well, can't put metal back on.

use JB Weld or Quiksteel to fill in the gap.

oh, and if i ever get around to getting another torpedo reg, i have a stock cocker reg i'd be willing to part with if you still need it by then.