PDA

View Full Version : Lubbing?


spydervs2
07-19-2007, 05:10 PM
What should I lube on my VS2 marker I know the o- ring on the mini striker but is there anything else?:)

th3_0n3
07-19-2007, 05:45 PM
The bolt is sometimes a good idea to lube. I had problems with my VS-2 uncocking and all I had to do was lube the bolt.

spydervs2
07-20-2007, 05:26 AM
well in the manual it says that you don't have to lube the bolt and is there anything else that I should lube?

swoosh81
07-20-2007, 05:33 AM
If your reading the manual then reread it maybe it will tell ya.

faithalone
07-20-2007, 06:53 AM
all I do after a day of play is remove the bolt and striker and clean them real good making sure that all paint, dirt and debris is gone. I then apply oil to the o-rings and a light coat of oil on the striker and reassemble. I remove the barrel and clean it real good by running warm water through it.

That should be enough to keep your marker working real good.

Occasionally you may want to remove the valve assembly and apply a light coat of lube to the o-rings and a few drops of oil in the asa and dry fire 20-25 times with the barrel off to keep the regulator internals nicely lubed.

if its not broken dont fix it :)

Good luck!

spydervs2
07-20-2007, 05:02 PM
Thanks!!!!