PDA

View Full Version : VS2 Pb.


ping_31140
07-14-2007, 04:44 PM
I have 1 VS2 and my problem is as follows.
When I draw gently it goes well.
As soon as I start to give rhythm, there are 6 to 8 balls which leave then it is disarmed.
Thus I ask the people who one resoluent the problem how they one faient?
For information my operating pressure is of 220 PSI and swiftness screws it is to loosen thoroughly.

afflicted for English I am French.

faithalone
07-14-2007, 05:03 PM
You may want to up your pressure a bit. Especially if the marker is new. The regulator may not be broken in yet and you may be starving it of air. Up your air pressure to 260-270 or so and adjust your velocity to about 270-280 FPS. Try that for about 2000 rounds and then see if you can lower your pressure back down to 220-240 range.

Your English is much better than my French :)

Good luck!

ping_31140
07-15-2007, 03:18 AM
ok I esseyer will make its, but the marker is not new.

Kenny_McCormic
07-15-2007, 02:44 PM
have you charged the battery? What kind of battery are you using? When it stops shooting does it make a buzzing noise that increses in frequency or does it just stop?