Feednecks?

[Nuwwave]

What kindof feednecks are you guys using? I was looking a the New Designz. Any good?

[pb34]

Most of the clamping feednecks out there will be just fine. Any of the following brands will work: New Designz, CCM, and Trinity. There may be a brand or two that I'm missing. Personally I have two CCM's and they both work great. Fit any hopper I've had to put in it and won't let go. I've had a little experience with the New Designz and it seemed to work fine too. Either way, you'll be fine with any of those.

[Herm]

im just using the one that came with my eggy. Whats the benefit of having a different one?

[pb34]

He's talking about a new feedneck for his gun not on a hopper. Instead of using the plastic elbow that comes with most Spyders you replace the feedneck on the gun with a stronger metal clamping one to hold the hopper. That way you don't have the risk of the plastic elbow breaking and your hopper falling.

[Herm]

oh i see sorry

[Nuwwave]

How about an ANS?

http://www.doropaintball.com/AB1038101Equick/shopexd.asp?id=8766

[pb34]

I wouldn't go with the ANS because it isn't clamping. It has o-rings in the neck that just hold onto the hopper and doesn't work as effectively as a clamping feedneck. Stick with the brands I listed above and you'll be all set.

[Krypt Keeper]

I have a New Designz and love it. I have seem alot of hoppers hit the dirt from broken plastic feednecks and the o-ring type especially on the electro hoppers with their added weight.

[ttam13xlpb]

yeah ndz and ccm are both good from what i hear.iv only had experience with the ndz though and they are pretty good.

[Sandman_Bravo]

I had the Trinity and it never seemed to clamp tight enough. One day the bolt broke. I picked up a ccm from Sundragon and it's been fine.
http://www.sundragonpps.com/paintball_spyder_feednecks.html

[Nuwwave]

How about a Warrior?

Ebay for $20 any good?

How about a CORE of LAPCO?

Also seeing some Trinity ones.

All between $20 and $30!

[Bilbo]

I use a warrior feedneck on my pilot. I like it a lot, and it is very secure. But be advised, it does wobble a little bit, even when the screws are tightened. It isn't much, and it doesn't affect the performance at all, but you may notice it with a full (heavy) hopper. I've been using one for a year to hold a revvy on, with no problems at all.

[Nuwwave]

Thanks.

I ordered the Warrior.

$20 on ebay.

I am using a VL Force.

It is kind of a big hopper, but its a force feed at about 20 balls/sec. with no chops.

It is a really nice hopper for $20.

Hopefully no problems.