View Full Version : help me!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

07-09-2007, 08:02 AM
omg! help me!!!!!!!!!!!!!!! my stupid 12o co2 tank is stuck on my gun! ffs i cant get it off its to hard to turn ... any ideas on how to get it off? please hurry

07-09-2007, 08:10 AM
have some one help you, one of you hold on to the gun the othe, the tank

07-09-2007, 08:14 AM
i tryed that but it wont come off!

07-09-2007, 08:22 AM
Just shoot off the pressure out of the tank. Make sure that when you do turn it you aren't turning the reg off the tank.

07-09-2007, 08:26 AM
i shot all the presher off theres no more air in the tank i coz it does its thing when its out of co2 RAPID FIRES.. but i cant get the tank off and its makeing me rlly mad

07-09-2007, 08:31 AM
Unscrew the tank a turn or two - shoot it a few times to relieve pressure. If it still shoots after two - three shots, turn the tank a little more (about a quarter of the way.) Shoot again a few times. If it still does this, turn it a little more, shoot again - continue until ALL the pressure is off the tank and out of the gun. Tank should just come right off easily then.

If it's THAT hard to turn, an on/off with a bleed port would be a good item to purchase.

07-09-2007, 08:35 AM
im sayin it is so hard i cant even turn the tank

07-09-2007, 08:40 AM
ok i got it ty your idea worked.. THX :)

07-09-2007, 02:47 PM
Man the way he was straining I was going to suggest eating more fiber.:dodgy:

07-09-2007, 07:31 PM
did you grease your threads before screwing your tank on?

VS2 King
07-10-2007, 05:40 AM
Sounds like to me that this kid is totally weak and needs to put some muscle on his body. tanks shouldnt be hard to take off unless you strippied it and put it in sideways or something.

07-10-2007, 05:51 AM
the first couple times i put on my 12oz it was difficult to get off

07-10-2007, 07:42 AM
Press the bolt FORWARDS...(Twards the feedneck) And it will get rid of any extra pressure. Even if there is 100 psi left (((((When it is un-cocked)))))

Have one person hold the gun and you hold the tank (or the other way around) and both of you push the oppisite way (The way the tank comes off=)))) And do that as hard as you can. It should loosen up a little

07-10-2007, 09:04 AM
or just grease your tank threads and you dont have those problems.

07-10-2007, 09:06 AM
sounds like he cross threaded it to me