PDA

View Full Version : leak


Oscum Guy
07-05-2007, 04:19 PM
my spimmy had a leak so i took apart everything, and lubed+inspected the orings. then i put everything back together, and had an even bigger leak. the leak is coming from the back of the body, when i took the bolt out. what could it be?

p.s. the lpr is right at 75psi.

oldironmudder
07-05-2007, 04:36 PM
If it leaked worse after you tore it apart I would start replacing orings & checking the parts for nicks.

Critical
07-05-2007, 04:43 PM
Coming from the back of the body, make sure you didn't nick one of the ram sleeve orings on something.

Oscum Guy
07-05-2007, 04:53 PM
found out the leak is coming from the front of the slot in the ram sleeve.


edit: stopped that leak by replacing the ram, but i now have a leak coming from the valve hole.

Critical
07-05-2007, 06:46 PM
Replace the valve hole? Try either blue locktite or teflon tape on the threads.

Oscum Guy
07-06-2007, 08:19 AM
the hole in which the air exits the ram sleeve into the bolt. cant replace.