View Full Version : drop forward
07-04-2007, 10:21 PM
Might be blind but has noone made a solution to implement a drop forward on the VS? The tank in the back is way to rear heavy. but as i've seen now that the markers been apart is you need the dovetail molded into the grip frame.... some one want to machine something so i can make them rich selling parts?
Also i only had one bolt in the dove tail from the factory. is it suposed to have two?
07-04-2007, 11:06 PM
Just found this guy that put a cp razor drop on his, a bit of custom milling but the dovetail appears standard.
I'm a big fan of massive drops, and i have a spare drop forward but it has the standard two hole screw in. Are there any two hole to dovetail adaptors?
07-05-2007, 04:55 AM
I dont know of any drops with kingmans side ways pattern, but if you like BIG drops get you some scrap steel or alum. & bend it the way you like & drill the holes.
07-05-2007, 07:16 AM
VS2's got a straight pattern. i think i might have found something that could be usefull.
http://images.google.com/imgres?imgurl=http://www.marksmann.com/pictures/100x100/mpm119.gif&imgrefurl=http://www.marksmann.com/&h=100&w=100&sz=4&hl=en&start=22&sig2=5AznozRnW1IrE7UpZh104w&um=1&tbnid=2ASl1Ach67GSQM:&tbnh=82&tbnw=82&ei=wIuMRqH2DIXWgALb2NnYDA&prev=/images%3Fq%3Dpaintball%2Bdovetail%2Badaptor%26star t%3D20%26ndsp%3D20%26svnum%3D10%26um%3D1%26hl%3Den %26safe%3Doff%26sa%3DN
apparently CP might make an adaptor as well, i'll have to see if it works
07-27-2007, 04:54 PM
I have a CP Micro on mine and it slid on fine except for the face that the end of the slop is round and the VS tail is not but the drop is mostly on and works fine.