PDA

View Full Version : recommended ups???


glenjamindle
06-18-2007, 06:45 PM
I have an 06 Electra w/eyes. I'm using a 32 degrees spring kit and Empire revolver barrel kit. It runs on 68/4500 and I have B2 loader maxing the bps. Does anyone suggest anything else to max out the performance?

electradude1359
06-30-2007, 07:15 AM
metal bolt

06SpyderElectra
06-30-2007, 09:28 AM
where can you get the metal bolt at and what the brand and type for the top of the line one.

electradude1359
07-01-2007, 10:55 AM
i dont know but i want one
the plastic bolt is the bad thing about spyder

shunut
07-01-2007, 02:10 PM
I wouldn't switch from a Delrin bolt to an aluminum bolt. Delrin is lighter and doesn't require any lubrication. Look at the majority of high-end markers, they all come with delrin bolts.

If anything I might upgrade the board, but really its not necessary. The Electra with eyes is a great gun out of the box.

electradude1359
07-01-2007, 05:10 PM
yea but aluminum is more reliable
alot of good high end guns have metal

Kenny_McCormic
07-01-2007, 05:30 PM
yea but aluminum is more reliable
alot of good high end guns have metal
bull**** a derlin bolt with orings is 10x better and more reliable than an aluminum one. Because of the way spyders work they will destryoy themselves if you dont keep the bolt covered in lube because aluminum on aluminum with no lube will scratch and scratch and scratch until the bolt and reciever are both ruined. Stick a derlin bolt in there and all you have to do is wipe the paint off it if you chop. When you put a derlin bolt in a spyder it becomes nearly maintnece free just put oil in the ASA every 2000 rounds or so, dry fire 20 times and the gun is lubed