PDA

View Full Version : Dow 33 - Location?


Slammed0
06-18-2007, 05:15 PM
Where can I get it?

Do you have to order it online or can I find it at a local store like Home Depot? Thanks!!

pbfreak3221
06-18-2007, 05:39 PM
here (http://www.pbnation.com/showthread.php?t=1461086) Home depot probably wouldn't have it.

HelpDeskHustler
06-18-2007, 05:55 PM
http://www.dowcorning.com/applications/DistributorFinder/Default.aspx?prod_id=01889788&prod_ids=PROD&country=USA&language=E that should help you find a place that sells it. My local place is some plumbing specialist.

pb34
06-18-2007, 05:55 PM
You can get it here. (http://www.macrolineguy.com) I don't think Home Depot or similar stores will have it.

HelpDeskHustler
06-18-2007, 06:02 PM
like i said. the only walk in places that will sell it are listed on that page i linked to.

pb34
06-18-2007, 06:04 PM
Oh, sorry we posted at the same time.

Slammed0
06-18-2007, 06:13 PM
Thanks everybody!

Ace24
06-18-2007, 06:24 PM
There is a guy here that sells it. Hobby Horse. I get all my dow, macro, and fittings from him.

pb34
06-18-2007, 06:37 PM
There is a guy here that sells it. Hobby Horse. I get all my dow, macro, and fittings from him.

Thats the link I gave. It goes to his website.

bigred76
06-18-2007, 10:31 PM
HobbyHorse is the ****. I'd buy it from him as it's cheap and you can get some extra cheap macro at the same time. :)

nubs
06-20-2007, 10:03 AM
Im pretty sure dow 33 is the same thing as shocker lube might want to try looking for that to at your local paintball stores.

Slammed0
06-20-2007, 07:51 PM
Ok now that I got that cleared up I would like to ask another question. I own my first electropneumatic paintball marker. What do I need to lube? From what I understand it is just the Orings. Am I correct?

bigred76
06-20-2007, 08:46 PM
Which gat? It depends, some o-rings (like in Timmy's) you need to use DOW55, not DOW33. It'll say in the manual what to lube, but the rule of thumb is anything that rubs or has contact (namely o-rings).

Slammed0
06-21-2007, 01:11 PM
Cool thanks. Its the Smart Parts Epiphany. Ya, the manual says Orings but it is pretty vague really.

HelpDeskHustler
06-21-2007, 03:04 PM
put about .5mm light film on everything metal that touches anything while moving, and then a little heavier on o rings.

bigred76
06-21-2007, 03:38 PM
Claus, stop repeating what I say in more technical terms... :rolleyes:

Could you PM me how it shoots when you get it all working and take it to the field for a day, I'm curious about how they do. :)

timbertiger20
06-22-2007, 06:23 PM
www.grainger.com.......I personally go with Dow 55 for all sealing o-rings and tri-flow for all bolt o-rings as swelling can cause stickage depending on how tightly milled your marker is. There is also 2 versions of Dow 33 light and medium. All are available at grainger. You'd be amazed at the uses I've found for it!