PDA

View Full Version : firing


stefano_cercone
06-17-2007, 05:02 PM
i want to know if turn on your gun an begin to fire without co2, paint; only the "solenoid sound" the gun can be ****ed i you do that a lot for practicing walking on nights o things like that???????

Hob Hayward
06-17-2007, 05:25 PM
Eh, it was hard to understand what you were saying, but its perfectly fine to turn on the gun and make it click when there isn't air or paint.

pb34
06-17-2007, 05:40 PM
Yeah I think he means just turn it on and fire without any air or paint. That won't do any damage except run down your battery.

kidonfire
06-17-2007, 05:48 PM
Unless you do it constantly for hours(which would wear out the noid), then you should be fine.

Dwight Trash
07-28-2007, 10:06 PM
in the manual is says in bold letters "do not dry fire"

mylios101
08-07-2007, 10:45 AM
dry firing means to cock the bolt and pull the tricker with no CO2 or air, well i think so

paintballkid0206
08-07-2007, 12:17 PM
i thought that dry firing was Co2 only

pb34
08-07-2007, 01:41 PM
i thought that dry firing was Co2 only

Yeah, dry firing is firing your gun with Co2 only. Firing your gun without Co2 would just be clicking the solenoid.

Tito=PBL
08-07-2007, 01:59 PM
yea it should be fine just dont do all the time. it will wear down your noid.

Nuwwave
08-07-2007, 06:31 PM
Just don't so for an extended period of time without a break. The solenoid will heat up and swell.

paintballkid0206
08-08-2007, 06:11 AM
i click it (click the noid) whenever i'm bored and by my paintball stuff. lol. it's just so fun :p

Elfmaze
08-08-2007, 07:33 AM
yeah deffinatly don't let the striker slam against a non gassed up valve. you can deffinatly break you're valve that way. Firing without paint is ok for it though, just normal wear and tear there. I find i'm alot slower dryfiring than just clicking the noid

Also you need to practice pulling the trigger in shooting possitions, just sitting on you're couch doesn't do much