PDA

View Full Version : palmer stabilizer


sphven
06-16-2007, 10:46 AM
which of the stabilizer's do i need to get for my vs2 if i am using co2 and have the stock front block?

Theheroguy
06-16-2007, 12:26 PM
uh idk about stabilizers but this would work if you replace the stock asa with it
doolie (http://store.centerflagproducts.com/index.cfm?fuseaction=catalog.prodInfo&productID=32&categoryID=2)

Motorhead
06-16-2007, 01:26 PM
Use a "MALE" stabilizer .... Its screws right into your front ASA/LPC block.
You will need to replace your bottom line ASA because the Palmer unit uses standard 1/8 NPT fittings. New hose or macro-line will be needed as well.

Theheroguy
06-16-2007, 02:01 PM
the vs stock lpc block isn't threaded for regs

Motorhead
06-16-2007, 09:23 PM
Ah, my bad info & mistake. :confused:

sphven
06-17-2007, 07:30 AM
it's alright i think i've figured out what i need to do but it's going to be more expensive than i wanted. I'm going to need the trinity front block and a male stabilizer and then a new asa to replace the broken one on the vs2

Hob Hayward
06-17-2007, 11:50 AM
You could potentially get a female stabilizer, that way you wouldn't need a new ASA.

DRAGON
06-17-2007, 01:25 PM
You could potentially get a female stabilizer, that way you wouldn't need a new ASA.

I would go that route as you wouldn't lose any volume in the front grip as well. You'd need mounting rings for the female -

NeedForSpeed
06-17-2007, 02:35 PM
I have an ASA you could have for a few bucks. I also know where you can get a chrome palmers stab for $40. Interested?

sphven
06-19-2007, 11:44 AM
You could potentially get a female stabilizer, that way you wouldn't need a new ASA.
what really sparked my search for a stabilizer was that my asa had broken and i was going to need an inline reg and i heard that the stab. handled co2 well so i was shooting for one of those

Kenny_McCormic
06-19-2007, 01:22 PM
yea get the female stabalizer less parts to change out. to use the male you have to buy a new asa, front block, hoses, stabalizer and maybe a volumizer im not sure if the sock one will work. if you get the female you buy the female stabalizer, the mounting kit and a npt to metric adapter its much cheaper to get the female

sphven
06-20-2007, 08:15 AM
alright sounds good thanks for the help guys