PDA

View Full Version : help with pmr eyes


ttam13xlpb
06-05-2007, 07:57 PM
ok so i was 'messing around' with the pmr(we all no how that turns out) just pulling the trigger and clicking it when i thought i would try it with the eyes on.so i turned the eyes back on and blocked the eyes with my finger,i had the gun on psp ramp 15bps but when i shot it like this teh gun would only fire like 5bps???i shot it on semi auto before with the eyes on and it shot fine and i was shooting like 10bps.so do the eyes normally do this?or is one of the settings wrong?:confused: oh and BTW the eyes are virtue.

thanks

vikingshadow
06-06-2007, 06:15 AM
Your board isn't messed up and yes, this is normal.

The logic on the board is such that it "reads" ball movement past the eyes. Since all you're doing is sticking your finger in there, the board is reading it as an "error." Because of that, it caps the board at a lower rate to save you from chopping.

You should be fine once you shoot actual paint through it.

ttam13xlpb
06-06-2007, 07:53 AM
ok thanks