PDA

View Full Version : Rehydrotest


xSoulsx
05-30-2007, 12:44 PM
My tank does not have a hydrotest date on it...What do i do?

Hossy
05-30-2007, 01:04 PM
did you get it new or used?
and what brand?

xSoulsx
06-02-2007, 04:47 PM
I traded my neighbor for it... And he said he go it from his freind....



Its a WGP 50/3000 Tank

Hossy
06-02-2007, 07:49 PM
there should be alot of numbers and stuff imprinted on the bottle.
There will be a date....5 years from then is when its bad

bigred76
06-02-2007, 10:24 PM
Get us a picture of the label. From there I can tell you what exactly it is.

vikingshadow
06-02-2007, 11:13 PM
there should be alot of numbers and stuff imprinted on the bottle.
There will be a date....5 years from then is when its bad

Are WGP tanks 5 years? I thought they were 3 year tanks. Both my tanks are up for hydro this year - I think one may already be overdue! I know the other is up in September...

Kenny_McCormic
06-03-2007, 07:20 AM
steel and alluminum tanks are 5 years wrpped tanks are 3 years

Nenkitsune
06-03-2007, 09:06 AM
not really, E-10945 dot tanks are 5 year if the last test was done after a certian date.

For exemption code E-10915, if the last test date was before May 11, 2001 then your bottle is still on the 3-year cycle and must be tested every 3 years. If it shows a test date after May 11, 2001 then your bottle is now on a 5-year test schedule.

For exemption codes E-10945 and E-11194, your bottle is on a 3-year test schedule if the last test occurred before July 1, 2001. If your bottle has been tested after that date, you are now on a 5-year test schedule.

basically, it's a 3 year tank until it has been tested, then it is automagically changed to a 5 year schedule

(those numbers are for fiber wrapped tanks)

xSoulsx
06-04-2007, 02:19 PM
Which Row is the date on top or buttom?

Top Row= DOT-3AL 3000 M4625--H255367

Buttom= TC 3ALM 207 05A06 50 CU IN

Kenny_McCormic
06-04-2007, 02:27 PM
it was hydrod last in may of 06 not sure if it needs retesing in 09 or 2011

xSoulsx
06-05-2007, 12:13 PM
Ok, thanks for everyones help