PDA

View Full Version : My new mr3 mods and my new x7


zornox
05-28-2007, 11:37 AM
356

357

358

Mr3 runs at 375 psi with all the mods, shoots very well

yod3r
05-28-2007, 12:17 PM
nice markers, that x7 has to be heavy tho. Is it?

NeedForSpeed
05-28-2007, 06:35 PM
That x7 is a tank! Does it actually shoot paintballs or real ammo? wow.

Ace24
05-29-2007, 09:10 AM
I see you got your grips from that one guy. Looks nice.

The X7's are heavy with nothing on them... (we have them at the shop) I can't imagine how heavy they are with lots of upgrades and paint.

zornox
05-29-2007, 09:46 AM
Yea the grips are nice. The X7 is great for me i like the weight, great for woods ball. Its a beast.

Ballard32
05-29-2007, 09:55 AM
Nice X7. Is that modled after a SCAR

badmagic
05-29-2007, 11:44 AM
Where did you buy those MR3 grips?

Ace24
05-29-2007, 07:03 PM
The grips are from PatShortland.

What amazes me, I don't know if anyone else noticed, he has a regulator going inside that MR3 front grip housing. I would like to see how he managed that. (Notice the guage comming out of the grip)

Nenkitsune
05-29-2007, 07:25 PM
i noticed that gauge too. i didn't think much of it at first, but when ya think about it, that's insane

Mr.Untouchable
05-29-2007, 07:50 PM
So what do you think of the X7?

I've heard both good and bad about them.


But how did you manage to get a regulator inside of that housing?

MR2 Woodsballer
05-29-2007, 08:17 PM
A CP shorty reg will fit inside perfect. Thats what i did to mine i just didnt drill a hole for a guage.

badmagic
05-30-2007, 06:51 AM
The grips are from PatShortland.

What amazes me, I don't know if anyone else noticed, he has a regulator going inside that MR3 front grip housing. I would like to see how he managed that. (Notice the guage comming out of the grip)

Does he still have grips available?

zornox
05-30-2007, 07:10 AM
X-7 mods

Serial #0000213
Duracoat Lizzard Finish
Tippmann SO Air-Thru Stock
Tippmann Response Trigger
Lapco Grip Bottom
Hogue Grip
JCS Jet Click
Aimpoint Red-Dot
Rear Flip-up Sight
Custom Front Gas Tube and Sight
Custom Barrel with C-Series Muzzle Brake
UTG Rail Covers
Magpul
Yankee Hill Sight Riser

Pelican 1700 Hard Rifle Case

Mr3 mods

1) Alamo City Bolt & Striker
2) J&J 141n barrel
3) Custom Products "Screw-Through" ASA
4) 48/3000 HPA tank & remote line.
5) Grips patshortland
6) Stock Jcs folding stock
7) RED DOT SIGHT
8) Qloader
9) New Designz Spyder High Performance Valve
10) CP reg long with gauge

ViperX
05-30-2007, 04:34 PM
Yeah, the warfare grips are great, too bad he kind of pissed allot of the first run of people off that were interested in them when he took orders way before they were ready, even though he said they were. He kept his word though, I finally got my grips and am impressed with them, nice sturdy and comfortable feel.

Any CP reg will fit, however the long CP Reg only comes with a macroline fitting and the fitting is so far recessed that no other fitting will fit, kind of like the barrel shroud on the MR2/3. The CP long will work, but your limited to using macroline only, as a woodsball fan, i'm not big on the plastic hoses, I prefer braided line instead, so the CP shorty reg will do the trick and is mechanically the same as the long, just has a different size body on it. Also you can get the regs with or without gauge ports.

The foregrip on both the MR2 and MR3 although they are slanted, the center hole drilled through them is at a 90 degree angle from the body of the marker so fitting them in is no problem.

Also, I've handled and x-7 before and they seemed far lighter than the MR2, and that was comparing the two within a 30 min period. The x-7 is a hot looking marker, but costs way too$ much for a baseline hop-up of the a-5 with very little performance increase. Now if they sold it with an electronic grip from the get-go, I'd be on the tippman sites and not the spyder.

MR2 Woodsballer
05-30-2007, 09:44 PM
I checked out an X7 today and it is a whole lot lighter than my MR but I just can't justify spending (with the upgrades I would do) what I would on an used dm6. Still a nice gun tho.

Scipio
06-03-2007, 03:08 PM
How do you like the Qloader with your MR3? I've had some problems with the Qloader on my MR3.

zornox
06-04-2007, 06:10 AM
I have the RAP4 Qloader Sniper Adapter for the MR3 now works alot better then the hose. I had to take the prewinds all they way to 7-8 to get it to work tho.

http://rap4.com/paintball/os/qloader-adaptor-spyder-p-2984.html

Scipio
06-04-2007, 11:36 AM
Thanks for the advice regarding the RAP4 adapter. Have you tried using Bob Long Intimidator detents in the MR3? They have some that are much stiffer than the stock MR3 detents. You should specify stiff detents. That may allow you to boost the prewinds back to the recommended amount.

spyderbanger
07-16-2007, 04:29 AM
I noticed you dont have the front sight on the MR3. Are you still using it cause I lost mine? I have a X-7 x36 carry handle on mine and I mounted the front sight on top of that. It has a cut out for a hopper (or qloader in my case).Anyways it fell off cause of the cut out.

chnk
07-25-2007, 01:54 PM
is there a website for this PatShortland

i tried googleing it not much luck though

wylde01
07-25-2007, 07:39 PM
no there is no website for him. he is/was a member of this forum. i was pm'ing him for a few days early in july but he has not been on anymore. dont count on getting ahold of him for any grips.

chnk
07-25-2007, 11:15 PM
no there is no website for him. he is/was a member of this forum. i was pm'ing him for a few days early in july but he has not been on anymore. dont count on getting ahold of him for any grips.

aight nvm then, i guess ill just wait for kingman