PDA

View Full Version : Wont Shoot


doom
05-25-2007, 05:01 PM
I took my 2006 xtra out to play today and when i fired the gun, it uncocked. i had just filled up the tank to. and tried someone elses. you can also hear air escaping near the low pressure chamber (i think, its right under where the barrel attaches screws to the gun.
The people who own the field looked at it and couldnt find out what is wrong.
Should i take it to a shop.
Or can anyone help me

vwjimmy
05-25-2007, 05:35 PM
How often have you used it and how old is it? Do you take it apart regulary to clean and lube it? Sounds like you need to lube and/or replace the striker o-ring....
Does it leak when cocked or just uncocked?
The leak is probably the cup seal, and that might straighten itself out with repeated firings.....

doom
05-25-2007, 06:26 PM
Nevermind
the cup seal was damaged.
does anyone know a price range to fis it at the shop

rzimmer17
05-26-2007, 06:57 PM
come on over i got one

kidonfire
05-26-2007, 07:02 PM
You can take some high grit sand paper and lightly sand it down. That would be a good thing to try first.

Kenny_McCormic
05-27-2007, 12:04 PM
and you dont need to take it to a shop for a cupseal they would probably laugh at you if you did

druid
05-27-2007, 01:48 PM
cupseal...unscrew it fromthe valve pin and install new one. It's as simple as breathing.

Oil your striker ORing also. Recocking issues are normally tracked back to that one thing.

doom
05-28-2007, 05:31 PM
woops i meant valve body.
is that easy to replace

Kenny_McCormic
05-28-2007, 07:00 PM
yes remove the brass screw under the trigger fram and push it out with something soft like a plastic pen

doom
05-29-2007, 07:14 AM
And call kingman for a replacement

DriverJ
05-30-2007, 09:30 PM
otherwise buy a high flow replacement valve from Compulsivepaintball or pbgear or whatever your choice of online stores is :)