PDA

View Full Version : uncockis


LiquidSmok3
05-15-2007, 03:07 PM
whever i shoot really fast my pilot unocks but only on semi

Motorhead
05-15-2007, 10:43 PM
Sounds like you have a dry striker/bolt thats need lube.

Sandman_Bravo
05-16-2007, 05:07 AM
-or the ACS is doing it's job. It's possible to achieve higher rates of fire in semi than auto or burst. If you were walking the trigger and had a possible chop; it will uncock on that ball instead of chopping. It never hurts to do a clean and lube though. I prefer slick honey to oil.
http://www.slickoleum.com/index.html
Macroline guy has it:
http://www.macrolineguy.com/

woodballvs3
05-20-2007, 12:51 PM
The ACS WILL NOT uncock wen it detects a ball not sitting right. The bolt is still atatched to the striker so when the striker gets recocked the bolt does too. Thats why u r supposed to lube and my #1 up would be Feedneck then reg then guage

shunut
05-20-2007, 01:20 PM
The ACS can cause the gun to come uncocked. If the ACS is not broken in properly and the spring is too stiff it will not allow the striker to push the valve pin in enough. So some air is released but not enough to recock the marker.

Do you have any upgrades to your pilot Liquid? and do you run co2 or air?