View Full Version : new e-mr1

05-15-2007, 06:25 AM
hey guys have u seen the new mr1, with electronic trigger, just thought you guys would want to know. also do you think those grips word work on the semi autos?

05-15-2007, 06:28 AM
Yes we've seen the new E-MR1, original pics were posted almost a month ago by one of the mods who received the new Kingman catalog. And, no, the grips would not work on the mech frame, if you look closely, the E-MR1 has the same 3 screw set-up as the MR2, while the mech MR1 has a 2 screw set-up. Now, if you're asking if the whole grip frame will fit, then yes, as the MR1 uses the standard Spyder frame mounts.

05-15-2007, 05:49 PM
i have not seen the new eMR1, can i have a link please?

05-15-2007, 05:54 PM
...why would you want an E-MR1 when you can get a MR2 and not have the rail problems...

05-15-2007, 05:58 PM
i just wanted to see it, im not gonna buy one...... i already have an MR1

05-15-2007, 06:26 PM

05-16-2007, 09:55 AM

good call.....

its not a good idea if you ask me.... you can just get an etrigger for your mr1 for about $40 cheaper than that..

05-16-2007, 12:34 PM
good call.....

its a pretty stupid idea if you ask me.... you can just get an etrigger for your mr1 for about $40 cheaper than that..
Or get an MR2..

It's not a good idea if you ask me... it's silver, comes with an upgraded delrin bolt, upgraded stock, and e-grip, when you can get an MR2 for the same price that has a BUCH better rail system, delrin bolt, e-grip, and has the hideaway cocking pin.

E-MR1 is a waste of money.

05-16-2007, 01:33 PM
If it's cheaper than the MR2...and doesn't have an ACS bolt, I'll tell you right now that it'll be better. Lighter also.

Woops...except it's called at 15BPS, that's it's only downside IMO.

05-16-2007, 01:44 PM
15 bps is enough for woodball ...

05-16-2007, 03:19 PM
Lets take it easy guys. You can not like the idea of a eMR1 but we can do it without the "stupid" and "retarded". Thanks.

05-16-2007, 04:11 PM
Or get an MR2..

It's not a good idea if you ask me... it's silver........

Comes in silver or green - ;)

05-16-2007, 09:04 PM
15 bps is enough for woodball ...

Yeah but I like Speedball too.

05-28-2007, 11:42 AM
The stock is kinda cool in a way. I wonder......

06-21-2007, 07:51 AM
MR1 rail problem can be solved very easylly by cutting the cocking pin flush with the rail and attaching a rear cocking tail to the bolt.
Get a JCS folding stock.

The MR1 can also be mod to be Low Preasure, which lowers its noise level down dramatically. Try that with the MR2. You would have to chop the plastic front handle. At most an ugly job.

I just finished modding my MR1:
Red Dot
Rear cocking handle
JCS Battle folding Stock
HPA tank under the barrel looking forward
CP LP regulator
Maddman LP valve and springs
Polished bolt and trigger sear

It shoots great (it did before also), but now if fits, it is quite and better balanced.