PDA

View Full Version : Cocking knob falling out


shark
05-13-2007, 06:02 PM
I played in a tourny yesterday and kept losing my cocking knob diving into the snake. Does anyone know how to solve this problem?

LiquidSmok3
05-13-2007, 06:05 PM
tighten it like push it down harder

Raiderz628
05-14-2007, 02:18 PM
I had problems with both of my Pilots I called Kingman and sent the bolt in to be replaced and they have been working great

WearyCorpse
05-21-2007, 01:14 PM
either the nob stem is too small or the hole is too big. figure out witch and change it.

Critical
05-21-2007, 02:40 PM
What's happening is that as the bolt cycles, the cocking knob is hitting the back of the slot. The only way that has been found has been to either convert to rear cocking, or mill the slot so that the knob no longer hits.

weitjosh
05-21-2007, 10:12 PM
You can do either one of those mods, or i found a cheaper and easier mod to do. pull out your stock striker stop and run to your local hardware store. in the plumbers section they will have all kinds of those washers, find one thats a little bit thicker and you will no longer have this problem.