PDA

View Full Version : Looking for help with Spyder SE


kayfabe1204
05-09-2007, 04:22 PM
Looking to upgrade an SE but its weird as the expansion chamber goes directly onto the body. Anyone have any ideas how to set it up to take a low pressure system?

spanky1205
05-15-2007, 01:00 PM
The older style spyders do not have a front block like the newer spyders do. This is why you have a weird expansion chamber. With out pics I am guessing the ex-chamber screws directly into the body. You will have to find a verticle adapter for your spyder to put in place of the expansion chamber. With the verticle adapter in place you will be able to screw in a regulator. Most of the other mods you will have to do are pretty well documented in this forum if you look around abit. The other thing to be aware of is your striker. You have a fatty style striker where the newer guns have a slim style striker. Again this is also pretty well documented you will just have to look around.

This is only a guess, without seeing pics to verify things that is about the best I can do. Since no one else took a stab at your questions I thought I would try and give some help.

Have a nice day,