PDA

View Full Version : jammed bolt


Ferris144
04-25-2007, 06:35 PM
yeah so i can't get the bolt out of my pilot, its never happened before, i dont know what to do, it comes out like half way, and then it gets stuck on something i can not see. any ideas how to remove it?

ProFalcon
04-25-2007, 07:22 PM
make sure you have the pin pulled up all the way, sometimes it will click in again halfway out.

stylinbeaver
04-25-2007, 07:26 PM
Have you removed the trigger frame? Also, make sure you have the cocking pin pulled out.

Ferris144
04-25-2007, 07:30 PM
i have removed the trigger frame as well. i have definetly pulled out the cocking pin! its completely out.

stylinbeaver
04-25-2007, 07:53 PM
Try pushing it out with a wooden or plastic spoon.

Ferris144
04-25-2007, 07:56 PM
I have also tryed that, i've pushed and pulled as hard as i could. it feels like it is just stuck on something. its not budging.

Nenkitsune
04-25-2007, 07:58 PM
wow that's crazy....hmmm have you tried taking everything apart? like the back plate, striker, spring.

Ferris144
04-25-2007, 07:59 PM
mm the striker is still in the gun attached underneath the bolt, they together won't budge.

TheRedBarron
04-26-2007, 06:16 AM
sounds like you have either a ripped o ring or a broken paint piece jammed between the bolt and the breech, take a large diameter wooden spoon put the handle in the breech and tap the end with a hammer softly.