PDA

View Full Version : MR2 speedball look


Alien
04-23-2007, 08:37 AM
Hi, I would like to know which parts I should get to customized the MR2 into a speedball gun . Thank!

QuiGonKen
04-23-2007, 10:58 AM
everything thats needed to prevent chops:
ACP bolt, reg, faster hopper....

probably get rid of the foregrip...adds some weight...

and if anyone ever figures it out...eyes? lol

Alien
04-23-2007, 11:37 AM
what kind of foregrip , expansion chamber i can add to keep the speeball look

Glasher
04-23-2007, 11:47 AM
Just buy a speedball guy, even with some stuff off the overall body of the MR2 is a bit heavier than the rest.

Maxx-Damage
04-23-2007, 11:56 AM
Thats kinda wierd buying some guy that plays speedball.

To make a mr2 into a speedball gun, just remove the sight rail, take off the stock and put something in its place, buy a halo b with the new board and rip drive, get a alamo city bolt, lose the foregrip, get new grips, or just buy a brand new gun.

Alien
04-23-2007, 11:59 AM
I already have those thing but when I tried the MR2 with the Qlaoder this was **** . My gun is making a weird sound like " burrpppp" . When it doing this it double feeding or I need to recock the gun..

new_Faction64
04-23-2007, 12:38 PM
A pump marker can be used to play speedball...so can the MR2 out of the box.

yod3r
04-23-2007, 01:55 PM
Thats kinda wierd buying some guy that plays speedball.

lmao i got a laugh from that

just get the gun to stop chopping and get as much wieght off from it as you can...just like everyone else said

Ace24
04-23-2007, 02:54 PM
I already have those thing but when I tried the MR2 with the Qlaoder this was **** . My gun is making a weird sound like " burrpppp" . When it doing this it double feeding or I need to recock the gun..
Your air was low... Has nothing to do with the Q-loader. That or your sear wasn't catching.

Alien
04-23-2007, 07:04 PM
so I should just oil all the parts and everything should be ok?

Critical
04-23-2007, 07:20 PM
Use Dow 55 lubricant, not oil. Regular paintball oil can cause the delrin bolt to swell.

Glasher
04-23-2007, 08:05 PM
Use Dow 55 lubricant, not oil. Regular paintball oil can cause the delrin bolt to swell.

it's a ACP bolt they are made out of a non swelling derlin, but dow lubricant his always betetr anyway.

Alien
04-23-2007, 08:16 PM
Im gonna try to put back my normal board to see if it's doing a difference..

The Booth Man
04-23-2007, 09:59 PM
Use Dow 55 lubricant, not oil. Regular paintball oil can cause the delrin bolt to swell.

Dow 55 is designed to cause your o-rings to swell

Dow 33 is ok because it is designed to maintain it's viscosity (not gum up) at extreme pressures and temperatures, but it is relatively expensive and most local stores don't carry it and probably don't know what it is


You can find a similar grease at almost any auto parts store.
I use Mobil One Synthetic Grease. It is cheap and it was designed to lubricate joints, bearings, and other spots that have rubber seals, which face extreme pressure and temperature fluctuations.

Critical
04-24-2007, 06:04 AM
Dow 55 is designed to cause your o-rings to swell

Dow 33 is ok...

Whoops! That would have been bad. Thanks for the catch.

jared02
05-11-2007, 12:41 PM
well if needed get a rocking trigger,.. a fast hopper, i would take off the stock.

theas are just the basics

Glasher
05-11-2007, 02:18 PM
well if needed get a rocking trigger,.. a fast hopper, i would take off the stock.

theas are just the basics

rocking don,t fit the MR2

jared02
05-12-2007, 11:16 AM
rocking don,t fit the MR2

i thought all rocking triggers are for spyders!
i was reading a post on a different fourm and ppl said tht it was possible,..

MR2 Woodsballer
05-12-2007, 11:29 AM
no, no, and no it is a well established fact that MR2 and MR3 trigger frames were specifically designed for those guns no other trigger frame will fit them. As stated in many previous threads.

wylde01
05-12-2007, 12:15 PM
woodsballer is correct. if you take a look at your mr2/3 and then at a regular e-frame spyder, you will notice that on the mr the trigger frame actually sits in the gun whereas the e-frames more or less sit on the gun. i hope this sounds clear.

Maxx-Damage
05-12-2007, 01:16 PM
Well today i actually used my MR2 in a tourney. We didnt do so well, but we ahd fun. All that i did was remove the stock, sight rail, and those side panels. It added up in wieght. I didnt chop any pb's(must be the origin) but my bolt stopped a few times. Actually had some shocked faces when people saw it shooting as fast as it/i did.

jared02
05-13-2007, 11:02 AM
oh,
wow i did not even know that,...
well i will still probily buy a MR2.
25bps is pretty good.

but thanx every 1,.. i had no idea,..