PDA

View Full Version : new spimmy project.


Oscum Guy
04-13-2007, 08:48 PM
i am doing a spimmy project with a spyder rocking trigger, a cocker lpr and a cocker 3way. the three way will be attached to the spyder noid.

http://i68.photobucket.com/albums/i18/oscumguy/IMG_1163.jpg
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1161.jpg
http://i68.photobucket.com/albums/i18/oscumguy/CIMG0268.jpg
http://i68.photobucket.com/albums/i18/oscumguy/CIMG0265.jpg
http://i68.photobucket.com/albums/i18/oscumguy/CIMG0264.jpg
http://i68.photobucket.com/albums/i18/oscumguy/CIMG0263.jpg

halkbacking job
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1153.jpg
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1150.jpg
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1148.jpg
http://i68.photobucket.com/albums/i18/oscumguy/IMG_1146.jpg
thoughts?

spitfirocks
04-13-2007, 11:18 PM
pretty cool, what was that before you modded it?

CHAOSFTW
04-14-2007, 05:26 AM
that was a rodeo

HelpDeskHustler
04-14-2007, 07:06 AM
wow... its like Frankenstein all over again

Oscum Guy
04-14-2007, 08:27 AM
pretty cool, what was that before you modded it?
i dont understand the question. but i did cut off part of the back of the frame, dremel some more holes and canals and drill and tap a hole to hold the trigger guard in cause the barb was in the way of it. also widened the first trigger guard hole. <if thats what you mean.

that was a rodeo
ive heard that more than once. Its not a rodeo body. altho the new spyder xtra body is the same. lol.

bamf-hacker
04-14-2007, 08:18 PM
It is a Spyder ;)

Didn't you have enough with the first one :)

Post up more pics as you have them. Good luck with number 2

Oscum Guy
04-15-2007, 07:18 AM
It is a Spyder ;)

Didn't you have enough with the first one :)
no. lol i get bored without a project. and this is for my brother and hes funding it. free project= awesomeness

Post up more pics as you have them. Good luck with number 2
i will post more today. Thanks! i aslways forget to do in progress and befor pics.

Oscum Guy
04-17-2007, 04:19 PM
new pics up now, sry for quality.

JailBreakJIm
04-17-2007, 05:55 PM
Is this your original idea?

Oscum Guy
04-17-2007, 06:05 PM
yes its my idea, if thats what you mean.

VagabondStarJXF
04-17-2007, 11:41 PM
Looks like this is coming along quite nicely so far.

Have you thought about using a 90* elbow to attach the LPR to the VA? If it'll fit, I'm not sure it will being that the LPR is one of the fatter ones, it would allow the LPR to sit alongside the body rather than stick out like that. If a 90* elbow on its own isn't long enough you could get a straight adapter and use it as an extension. I'd thought about doing this for a Spyder/Cocker project a few years back so I think it might help your Spimmy project.

Oscum Guy
04-18-2007, 03:39 AM
yeah i was considering doing that. it will probably happen eventually. that way the hoses could be shorter to.

JailBreakJIm
04-18-2007, 04:34 AM
yes its my idea, if thats what you mean.
then you should patent it because its an awsome concept.

Oscum Guy
04-18-2007, 12:02 PM
lol, i dont care if anyone takes my idea. mines just the first. this is kind of borrowed from othe ideas as i found out after i started, but it the combination of ideas that makes it the first.

alright its got all of the timmy internals. sounds regular so far. but then i use an esp frame. nothing special. next i use a cocker lpr. its been done before. but last i throw in the concept of using the cocker 3way triggered by the magnetic spyder noid. thats where it gets crazy.

some person on pbnation told me that some older electro cockers used a 3way and a magnetic noid.

HelpDeskHustler
04-18-2007, 01:21 PM
then you should patent it because its an awsome concept.
it's a cool idea but it isn't likely to be taken. due to cheaper, more efficient ways of working a marker.

HelpDeskHustler
04-18-2007, 01:54 PM
sorry to tell you this after you have messed up all of your gun... that electro solenoid only activates for a fraction of a second on the stock board... and holding it up longer will completely drain the battery insanely fast. a timmy requires a decent amount of time w/ the 3 way open in order to fire. also unless the 3way stem is welded to the electromagnet and the electromagnet has a spring attached, it wont return to the rear position to reset the bolt.

Oscum Guy
04-18-2007, 02:02 PM
yeah, im gonna use a pull spring to return the electromagnet noid.

i just saw the ep noid on the sd website. i think this will work since its made to make a spyder an ep gun. its only $15 for it. im lookin for cheap cuz this is funded by my bro and i want to spend money on my other spimmy. its my baby and this is its ugly stillborn twin. lol.

HelpDeskHustler
04-18-2007, 02:22 PM
check your pm's or get on aim, we need to talk about this design.

Ace24
04-18-2007, 08:00 PM
*poops*

Um... What? If this works, see if you can get a vid. This monster will be interesting... no doubt.

MVS1
04-18-2007, 08:07 PM
My thoughts?...Somebody needs to take your Dremel and Drill away from you:D. J/K
I salute your ingenuity, that is going to definitely be an awesome marker when its finished.

Oscum Guy
04-19-2007, 03:43 AM
yeh im gonna have to think of a new design. ill still try it but its imorobable it will work. so i learned on aim yeterday.

JailBreakJIm
04-19-2007, 01:40 PM
Well I will Try my Hardest To make this thing work.
Even tho im broke and a paintball mod No0b.