PDA

View Full Version : What is it and how do I fix it?


hjennings
03-25-2007, 09:50 PM
Bought this marker off of eBay to fix but I'm stumped. It has an internal leak so I'm sure its a bad O-ring. However, no clue how to get it all apart.

Removed the trigger frame, removed the two allen-head screws on the back sides, removed the VA and spring, removed the front plug and spring, and removed a small screw/bolt on the bottom (can't see it w/o taking off the trigger frame... doesn't seem to do much lol).

With all that apart, I expected the bold and such to slide out the back. But it doesn't! The top rear plug is still firmly in place and I have no idea how to get this thing the rest of the way apart.

Heck, I don't even know what kind of marker it is. lol!

Help me out guys, please!


http://i22.ebayimg.com/01/i/000/8e/98/78f7_1_b.JPG

THANKS!

druid
03-26-2007, 01:09 AM
http://www.spyder.tv/section/contact_us/index.html#tech

calebh
03-26-2007, 11:24 AM
see that little pin in bottom tube towards the back? pull it out. spring pressure will push the plug right out. the bolt and striker will fall out the back, and you can change whatever orings you need to.

Oscum Guy
03-26-2007, 12:08 PM
in this gun it isnt a pin it is a screw.



looks like one of those spyder classics.

hjennings
03-26-2007, 03:46 PM
Already removed those screws (there is one on each side). Have the velocity adjuster out. The spring and rubber bushing behind that came out, too.

Then removed the front plug (which is where a LPC would be on newer guns), and a spring.

Can't get the internals out, though.

Above the VA there is another plug that will not come out. I'm guessing I need to get that out then everything will slide out the back... but I've pried and pocked and can't get it loose. ???

yod3r
03-26-2007, 04:17 PM
that same exact thing happend to me and i asked and no1 could figure it out, you have to take the top rail off and the back plug that you are prying on will come right out

hjennings
03-26-2007, 06:02 PM
Yep, that was it!

OK got it all apart and there is a LOT of oil, and its kind of gunky, but the O-rings don't look bad. I'll clean it up and go ahead and replace the O-rings while I've got it apart.

So... anyone know what model marker this is?

yod3r
03-26-2007, 07:57 PM
i think its a spyder compact or compact 2000