PDA

View Full Version : Best High Flow Rate VA for LP?


Pwgsx
03-25-2007, 05:14 PM
Like the title says, what is the best VA to get the highest flow rate.....I have drilled my va but its not enough.

Trying to get my gun under 350psi Low Pressure, its either that or my valve.

Sandman_Bravo
03-25-2007, 06:09 PM
I have the 15* assault block and it works great. i can get sub 200 psi but run 325.

Pwgsx
03-25-2007, 06:43 PM
ill look into that one, do you think it flows more air than a drilled out VA......

what valve you running?

pb34
03-25-2007, 08:01 PM
ill look into that one, do you think it flows more air than a drilled out VA......

what valve you running?

It def. has better airflow than a drilled out VA. I think Shunut drilled out his VA as far as it could go but still got better results with the aftermarket one. I think Sandman is running a bandit valve. I have a 15* assault block too with a NDZ valve and can get below 250 psi but I'm running at about 280.

Pwgsx
04-12-2007, 11:52 AM
got it down to 225psi but I have it at 250 to get a higher velocity!! :)

weitjosh
04-13-2007, 02:37 PM
i use a 32 degrees high flow va with a 4" lpc. bought it as a kit on ebay for 15 bucks. 4 times the air flow and the lpc is an inch and a half longer than the stock one. theres tons of em on ebay from a site called pbandmore.com. check it out.

spitfirocks
04-13-2007, 03:23 PM
palmers stabilizer is good..

Pwgsx
04-13-2007, 03:36 PM
yea they are..........im happy :)

spitfirocks
04-13-2007, 03:37 PM
i think they go better with pilots over vs2's or other guns, i dont know why they just go hand in hand, i havew a fully uped pilot, and now im doin the same 2 a vs2 =) enjoy and if u have any q's feel free 2 pm

Pwgsx
04-13-2007, 03:39 PM
will do, I think I got everything I can do to my pilot.......its upped all the way and has T board and all. I love it!!